Box Turtle feet for Centauri Carbon 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric feet to mount a 4 lane BT on your CC1 like other ams'es
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A set of feet replacing the original ones to mount on top of a CC1, installation can be a bit complicated to preserve the hidden hardware look of the BT. It is recommended to have a long reach hex bit with rounded head. Reuses same hardware as stock feet.
For mounting it on the cc you will need 6 M3x8mm screws.
It is also recommended to have a bit of foam tape between feet and top of printer to dampen vibrations.
Image gracefully provided by Atomique13.
Mounting in big parts based on:
Installation
Remove stock panel screws from the top back panel mounts, 2 per side
Mount feet onto BT using original hardware
Install foam tape (optional)
Place assembly onto CC
Screw in feet using M3x8mm screws
Submit feature requests here!
Consider supporting me on Ko-fi!