Pinball drink holder: fits cans, bottles and coffee mugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal pinball drink holder that holds various beverage containers snugly and doesn't look the worst.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an universal beverage holder for pinball machines. It easily fits most soda cans, small soda bottles and coffee mugs. It has a lip close to the bottom to make coffee cups sit better and a cutout for the mug handle.
It's made of two pieces and the holder part can be easily uncoupled for washing. It can be made of cheap materials and it's durable enough for normal arcade use.
Printing
The items are provided in their intended printing orientations; the holder facing bottom down on the build plate and the mount upside down. A brim may be needed depending on your build plate adhesion.
The holder part is suggested to be printed of PETG. The top part has a lip that can be printed of another color to make the holder more noticeable and this can be done as mid-print filament swap on most machines. 3 perimeters and upper/lower layers with 20% fill seems to yield with strong enough part. I used 0.15mm layers for slightly smoother look but larger didn't seem to affect structural integrity.
The mount is intended to be made of PA, but can be made of PETG too if PA is not a possibility. No matter the material, print this with 100% infill as the leg bolts will crush it otherwise. PA is suggested as it does not crack the way PETG does. The leg bolts also should not be tightened with unreasonable force.
Assembly
A washer is required on both sides of the mount piece; the leg's uneven part and bolt's end will otherwise separate the print layers when force is used.