Quiet Riot Lightning Bolt Name Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metal Health madness! Quiet Riot's rare, electric lightning bolt logo plaque featuring modular extended bolt accents.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Feel the noise! This high-octane 3D wall plaque captures a super rare, electric variation of Quiet Riot’s logo, featuring sharp angled lettering surging through a geometric lightning burst.
(Sourced from a rare vintage Quiet Riot jigsaw puzzle print art, this unique layout is a true deep-cut gem for classic hair metal collectors!)
This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Two Display Options Included:
Standalone Core Plaque (Image V2): The main logo crest featuring the central lightning box background and raised lettering. (Note: Rotate ~15° on your build plate to fit standard print beds).
Extended Bolt Assembly (Image V2-2): Includes dedicated slots on the core plaque to attach the additional, large lightning bolt extensions for an explosive, full-scale wall display! The extension bolts are provided in a flexible .3MF file format so you can easily separate, arrange, or angle them on your build plate.
Multi-Layered Depth & Color-Swaps:
Engineered with distinct height steps across the base plate (0.23”), extra bolts (0.3”), main lightning crest (0.4625”), and top lettering (0.5625”) with standard 0.0625” insets. This structured layering makes manual z-height color swaps clean and straightforward for dramatic multi-color finishes!
Dimensions
Core Width: 9.5” (10.0” with extended bolts attached)
Core Height: 6.9” (13.26” with extended bolts attached)
Base Layer Thickness: 0.23”
Extra Bolts Thickness: 0.3”
Main Base Bolt Thickness: 0.4625”
Lettering Height: 0.5625”
Total Thickness: 0.5625”
Inset Step: 0.0625”
Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws or small finish nails for a completely flush wall mount.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the blocky angles and clean edges of the letters).
Infill: 10% or higher (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Looking for the classic stacked smooth or rugged block logos?:
Check out my companion listings here:
Where It All Began:
Want to see the original 90s pen-and-ink drawing that inspired this ongoing project? Check out the anchor model that started the series: