NexGen3D: DIY Steam Machine PRO-V2 - 256x256 Split Remix (Bambu Lab / X1C)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed version of the NexGen3D DIY Steam Machine PRO-V2 case, split into smaller sections to allow printing on 256x25
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the excellent NexGen3D: DIY Steam Machine PRO-V2 case. The original model requires a 300x300mm print bed, making it impossible to print as a single piece on printers like the Bambu Lab X1C.
To solve this, I split the larger case components to comfortably fit within a 256x256mm build volume. To maintain structural integrity and ensure a perfectly flush alignment, I designed 2mm registration holes into the split joints.
Assembly Instructions:
Clean out the registration holes on your printed parts using a 2mm drill bit.
Insert 2mm x 40mm stainless steel alignment pins into the holes (as seen in my provided photos).
Push-fit the corresponding case halves together over the pins. No glue or adhesive is required!
Print Settings
Printer & Nozzle: Bambu Lab X1C with a 0.6mm nozzle
Layer Height: 0.24mm
Wall Loops: 3
Top/Bottom Shell Layers: 4
Infill Density: 15%
Infill Pattern: Cubic