Qwirkle tile rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and colorful, those tile racks fits the Qwirkle travel edition.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 147
- Wydruki
- 2
- Wyświetlenia
- 1243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Important : This model is fitted for the Qwirkle travel edition (small tiles).
What is it for ?
Qwirkle is a simple yet addictive tile placing game. The travel edition is more compact with smaller tiles but the set does not include tile racks. This model correct that mistake.
Hardware needed :
A dab of CA glue (superglue) for the colorful shapes.
Printing:
PLA will do fine.
Printed with a 0.2mm layer height without supports. But I think 0.3 layer height would be fine.
No post processing needed except glueing the shapes in their respective location.
Tips :
You can print every batch of shapes on the same plate without removing the previous batch :
- Position all your groups of shapes
- Hide everything except one type of shape (eg: squares)
- Slice and repeat for every type of shape
When printing, swap filament color between each batch and make sure to remove the prime line before starting the next batch.
Let me know how it works for you :)