1 / 3
Silica Drying + Annealing Basket for Elegoo H1 HT — zdjęcie 1
1 / 3

Silica Drying + Annealing Basket for Elegoo H1 HT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple tray for the Elegoo H1 HT for drying silica beads and annealing parts

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Silica Drying + Annealing Basket for Elegoo H1 HT

The H1 HT goes up to 85 C which is just about useful for drying silica gel beads and annealing some printed parts.

Print Instructions

You must use a filament with at least 90 C temperature resistance!

Not all ABS/ASA do, so check the TDS for your specific spool first. I printed mine out of Polymaker PolyLite PC, which is resistant up to ~110 C.

Print upright with tree supports.

Tagi