1 / 1
Protisia — zdjęcie 1

Protisia

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a pen, marker etc. holder. It has holders that you can attach according to your pen collection.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

PROTISIA

Protisia is a desktop pen stand with spiral leave life holders for pen, pencil, marker etc.

Components

  1.  Base = It is the base where the holder column is standing on.

  2.  Column = The column has 30 holes where we can attach the holders at our desired height.

  3.  Holder = There should be 15 holders with pen holder hole sizes 8, 10, 13 and 16 cm of width. And 15 more holders with sizes 7, 9, 11 and 14 cm.

Features

  1.  The stand has 30 holes for 15 different heights. 

  2.  The stand is designed to hold pens without any problems even if all of its holders are full.

  3.  The stand can hold maximum of 90 pens/pencil/marker etc.

  4.  The holder have holes to hold pens with different width

  5.  There are holes of 6 different widths:
    Plate 1 = 8, 10, 13 and 16 cm holes.
    Plate 2 = 7, 9, 11, 14 cm.

  6. Both of the types of plates can be joined together inside the column to hold more weight on both sides.

Instructions

  1.  The holder plates and stand should be printed separately.

  2.  The holder are supposed go inside the holes in the column.

  3.  The holder plates are meant to be joined together inside the column.

Stand quantity = 1.

Holder 1 quantity = 15 max (depending on your need)

Holder 2 quantity = 15 max (depending on your need)

Tagi