1 / 3
Creality Extruder Power Take-Off – 35T Gear Attachment — zdjęcie 1
1 / 3

Creality Extruder Power Take-Off – 35T Gear Attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple external gear attachment that transfers rotational motion from the extruder mechanism to the outside of the print

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Turn your Ender-3 V3 KE extruder into a small mechanical power source! ⚙

IMG_8679.gif

This is a simple external gear attachment that transfers rotational motion from the extruder mechanism to the outside of the printer.

The idea is not to replace the original extruder gear, but to use its rotation to drive other mechanisms.

You can connect your own 3D-printed mechanisms, gears, wheels or other moving decorations.

Some ideas:

🌬 Windmill🌾 Mill
🎡 Rotating wheel
⚙ Gear mechanisms
🔄 Crank / eccentric mechanisms
🤖 Any other mechanical experiment you can imagine
Version 1.0 is a simple proof of concept.

The gear has 35 teeth, an approximately 18 mm outer diameter, and a 5 × 5 mm square shaft opening.

Feel free to remix it and create your own mechanisms!

If you print it, I'd love to see what you build with it. Leave a comment or share your remix! 🔧

⚠ This is an experimental mechanical attachment. Use at your own risk and make sure it does not interfere with normal extruder operation.

Tagi