1 / 7
Faucet to hose to Sawyer Mini adapter — zdjęcie 1
1 / 7

Faucet to hose to Sawyer Mini adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The adapter fits a G 3/4-14 thread and allows a water hose to be connected to a faucet. It provides a practical and vers

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

To enhance my enjoyment of still water and my soda maker, I sought a way to use my Sawyer water filter at home. Initially, I planned to create a holder for a PET bottle to achieve gravity filtration, enabling the Sawyer to screw onto the bottle. However, since I already had a drinking hose from my backpack hydration system, I opted for this solution instead.

The adapter is screwed onto an RSP pipe thread G 3/4-14 faucet, which is commonly found in European households and compatible with Gardena systems. The hose is then connected to this adapter, which in turn fits onto the Sawyer Mini. This setup provides comfortable flexibility when filling tall containers, such as carafes. At the same time, the Sawyer Mini offers enough flow rate to easily fill water bottles.

The inside of the adapter has a flat surface for the sealing ring, which should ideally be printed using TPU. Personally, I don’t mind if it’s not completely watertight, as unfiltered water would simply drip off the hose without entering the container if held sideways under the filter.

Of course, you can also use the adapter without a filter, just with the hose, for example, if you want to fill a large container more conveniently at the sink.

General Notes

The hose is not included. In my hydration system, it’s a 10mm TPU/PE/silicone hose with a wall thickness of 1-2 mm and an inner diameter of approximately 7-8 mm. If you don’t have a hydration system, such a hose can likely be found at a hardware store.

Please ensure you select a material and nozzle that are safe for your health, as the Sawyer Filter is a mechanical device that does not remove chemical contaminants. Using the adapter is done at your own risk.

Printing Notes

I print the adapter in PETG standing upright on the small radius with tree supports so the threat prints very clean.

Updates

The seal is now concentric and slightly rounded.

Tagi