Huglet — Heart-Hugging Frog | One-Piece Sculpture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chubby smiling frog hugging a heart. One connected model with an integrated base—no assembly or glue.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
Meet Huglet, a smiling little frog holding a rounded heart. A cheerful desk companion or small gift for someone who needs a hug.
ONE WHOLE PIECE
The frog, heart, arms, feet and base are fused into one connected model. Print it as a single object: no separate parts, glue or assembly. Approximately 62 × 51 × 59 mm; STL units are millimetres.
Original procedural design created with AI assistance. Mesh validation confirms a closed, watertight surface and exactly one connected component.
PRINT STATUS
Not physically test-printed yet. The preview images are renders of the actual model. One-piece construction does not mean support-free printing.
Suggested starting settings: PLA, 0.4 mm nozzle, 0.16–0.20 mm layers, 3 perimeters and 10–15% infill. Place the flat base on the build plate and inspect the slicer preview. Add supports beneath unsupported areas such as the heart tip and chin if needed. These settings have not been physically validated.
Print in one colour or paint the heart and eyes after printing. Share a make and your settings if you give Huglet a home!