1 / 3
Skadis Sabrent 252W USB charger mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to attach the Sabrent 252W USB charger to Skadis pegboards using the original backplate.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This allows fitting a Sabrent 252W USB charger to Skadis pegboard using the backing plate that comes with the charger.
Use M4 nuts and counter sunk M4 screws. For the 7mm base use M4x10 screws, and for the 5mm base use M4x8.
The pockets for the M4 nuts are tight, I needed to pull them in with a screw.
