TOP TETHER / HOOK ISOFIX _„Test model for Volkswagen Group and Toyota vehicles.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a practical hanging point to the back of the seat and make better use of the luggage compartment. ( umbrella, bags )
- Ocena
- 4,8 / 5
- Polubienia
- 450
- Pobrania
- 729
- Wydruki
- 8
- Wyświetlenia
- 6060
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Update:
13.10.2026 – expansion of the list of supported and community-tested models.
6,10.2026
“Thanks to the community, the models have been tested — see details below.
Thank you for the feedback.”
@AGB84 - Golf 7
@rpeservis - Skoda Karoq 2024 facelift
- Toyota Proace City 2025
@colicab - Toyota C-HR
@ius_medicum_543422 - Audi Q4
@AA_1045279 - Audi A4 B9 Avandt
@GandalfGrey_454565 - 2022 Mazda CX-5
@IanGuga_1460433- Skoda Octavia Combi
30.9.2026
Update:
A test model has been added along with a notice. Please use the test model first to verify compatibility, and if needed, adjust the Fusion file for your specific application.
I tested the model on a Škoda Karoq 2024 facelift, the fit is tight and stays firmly in place.
I also tested it on a Toyota_Proace CITY , where the fit was even tighter, which is why I’m attaching the Fusion file so the dimensions can be adjusted if needed.
“I do not recommend printing this in PLA due to the temperatures inside a car. I tested it with Prusament PETG.”
Print PETG
0,25mm Structrural
20% gyroid
3 perimeters
“I tested the model on a Škoda Karoq; the fit is tight and stays firmly in place.
KAROQ!!
I also tested it on a Toyota, where the fit was even tighter, which is why I’m attaching the Fusion file so the dimensions can be adjusted if needed.”
Isofix Toyota
“These dimensions allow you to adjust the gripping force in the ISOFIX slot and the clearance.”
“I added grips for attaching an elastic band.”
