AK-74/47/AKM Bayonet – Real Lug Mount, Airsoft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw-together AK bayonet prop with a locking mount strong enough to lift the rifle.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 178
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prop Combat Knife for Airsoft/Cosplay/Replica AK Rifles


The GOAT combat knife, imo.
Mounts and locks onto the bayonet lug and muzzle of an AK — just like the real thing. Designed and tested on my AK-74N airsoft replica, but fits the standard AK bayonet lug found on AK-47/AK-74/AKM pattern rifles and replicas.
No wobble or rattle once mounted
Won't fall off during normal handling
Quick-release via the locking pin on the back
The locking mechanism is seriously reliable for a 3D print
Once attached, you can easily lift the full metal rifle by just the bayonet
Print orientation matters: print all parts in the orientation set in the provided Bayonet.3mf file. This is needed for part strength, and some parts have supports that are only removable in that orientation, reorient them and you may end up with unreachable supports or a weaker print.
Hardware needed for assembly: (buy here)
M3x6 countersunk — 5x
M3x16 countersunk — 1x
M3x5 — 5x
M3x10 — 8x
1x pull-spring or rubber band (for the locking mechanism)
the countersunks are not strictly necessary but they look nicer in the places they are used
(Yes, it's more hardware than most bayonet prints, but that's intentional. This was designed to look and feel realistic and hold up to actual use, not to be the fastest thing to assemble.)