Creator 5 PTFE PCM-10 guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some of my guides were slipping off constantly so I made it a little more secure.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a completely different version of this that is far more direct. Check it out at: https://www.printables.com/model/1847580-creator-5-pro-ptfe-tube-guide
I loved the originals but unfortunately I was having problems with a couple of them staying in place. I made two remixes actually.
V1 has added notches on the inside to hold it in place. This is very secure! You will likely have to dremel them off but it is definitely my preferred version.
V2 has extended bottom and top grabs. Also works better and is removal friendly. It does move around a bit which is why I strongly prefer V1.
Let me know if you are having issues with them.