Partial Tamper for Blated Cap & Press Core Series Capsule Filling Machine: Sizes 000-00
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10-peg tamper for the Blated Cap & Press Core Series capsule filling machine so you can make less than 100 capsules
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a 10-peg tamper for the Blated Cap & Press Core Series capsule filling machine. It can be used with either the 100 hole or 400 hole models.
NOTE: This is for sizes 000 and size 00. Other models and sizes are coming very shortly!
This tamper allows you to tamp 10 capsules at a time instead of the 100-hole tamper that comes standard with the machines. This is to be used with Blated's "Tape-Up Method," in which you use a light, low-adhesive tape such as Gafferr's tape or painter's tape to cover holes on the frame plate and body plate. The Tape-Up Method combined with this Blated Partial Tamper prototype allows you to make less than 100 capsules at a time with your Blated Cap & Press.
Link to the capsule fillers this model is designed for:
If you have any questions on how to use this to make less than 100 or less than 400 capsules at a time with your Cap & Press, please don't hesitate to ask us!
NOTE on printing: You don't need supports to print, but printing with the break-away supports allows for an overall cleaner model. Additionally, I like to print with 50-90% infill or just 5+ wall layers to give the part some serious weight. It feels much nicer to have extra weight helping tamp down your powder.... the more the better.