PDGA-inspired Disc Golf Mando Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print mando signs like they have at official courses
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Introduction
I made this model to closely resemble an actual mando sign you see in professional events. It is based on screen observations, I have not ripped off an actual product.
Naturally, plate thickness and the embossing height are just a guess -- those cannot be fathomed from video at all. So I went with dimensions I consider practical.
If this official-looking sign is too "on the nose" for your course, consider my Inconspicuous Disc Golf MANDO Sign instead.
Printing
The bgcode and 3mf files have a colour change included at the proper height. Start with the plate colour (white) and switch to the lettering colour (orange or red) when prompted. The model is sized for a Prusa MINI-sized printer with a 180-mm (7") build plate.
Go for a material that survives outside -- PETG is the easiest to print from among those that are suitable. The attached bgcode files are made for 0.4-mm nozzles, but don't hesitate to use a larger nozzle if you have one handy, and reslice.
Mounting
There are two "pre-drilled" mounting holes at the top and bottom of the sign. They are made for 3-mm screws. Each has a thin layer of material left at the very top, so that if you don't need it, you can leave it closed an it will remain invisible. Press a screw right through it or use a suitable tool to punch through first.