[VASE MODE] Synapticulae Paint Stick Holder -MINI-
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small paint stick holder for 3mm diameter alligator clip painting sticks.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
Looking for bigger stations for all your painting needs? Check out the main project page:
https://www.printables.com/model/1810042-vase-mode-synapticulae-paint-station-clip-stick-ho
Synapticulae Paint Station -MINI- is a highly optimized 3D printable paint stick holder inspired by the popular corrugated cardboard variant found in hobby stores across the world. I've optimized it so that it prints with zero supports or infills via Spiral Vase Mode. It's small but mighty, but if you want to upgrade to bigger versions, check out the main project page for bigger platforms!
The stick holder is CAD'd in FreeCAD and modified in Blender. Parts are tested on Bambu A1 Mini on PETG-HF, PETG (generic), and PLA Matte on 0.4mm stainless steel nozzle.
System Format
The painting stick holder utilizes a series of corrugated channels that uses friction and plastic tension to hold the sticks in place. PETG is recommended, but initial tests with PLA don't seem to make much of a difference. Only difference is that it feel more brittle, but the less flex in the material actually makes the stick-hold much grippier.
Included in the 3MF (and STL folder) is a 'Test' model. This is a low-material quick print that can be used to dial in settings if need be (shouldn't be needed, since the settings are verified good-to-go on the A1 Mini).
Synapticulae Print Settings
------
Filament: PETG-HF (recommended), PETG (recommended), PLA
PETG is more durable; PLA holds sticks better
------
Nozzle: 0.4 mm
------
Quality:
Layer height: 0.28 mm
First layer height: 0.28 mm
------
Strength:
Wall loops: 1 mm
Top shell layers: 0 layers
Bottom shell layers: 3 layers
Sparse infill density: 0 %
------
Others:
Brim type: No-brim
Spiral vase: True
------
File Content:
⌀3mm, 16x60x80mm
**Notice**
Due to the nature of plastics, prolonged use with sticks stuck in the lattice will cause permanent deformation. This may make the sticks sit looser in subsequent uses.
Curious about how it was developed? Visit the manual site for more info:
https://tintinnabulum.ca/dev/dev_004#musings
Ready to upgrade to bigger stations? Or like the project and want to buy me a coffee and a box of Timbits? Check out the main project page: