Print-in-Place Folding iPhone Duo Mockup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Folding model of the iPhone Duo allowing evaluation of the overall size and shape. The hinge is print-in-place.
- Ocena
- 4,667 / 5
- Polubienia
- 61
- Pobrania
- 1950
- Wydruki
- 8
- Wyświetlenia
- 4874
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model provides a representation of the overall dimensions for the iPhone Duo, to evaluate how it feels in the hand, and whether or not it will fit in your pocket.
It was modeled using overall dimensions announced by Apple (not a dimensioned drawing or measurements from an actual device); because of this, the envelope is extremely close to the actual product, but may not be exact. Other features (buttons, switches, lenses, and ports), were derived from photos, so their dimensions and locations are very close, but not precise. As such, this model is not appropriate for designing cases or accessories.
Use this model if:
You want to know how it feels to hold it, whether the buttons are in convenient locations, and whether it will fit in your pocket.
You have a whining, overly-dramatic teenager who will “just die” if they don’t get an iPhone Duo for Christmas like all their friends…this is your iPhone.
You know an Apple fan with an upcoming birthday (add some text to the inside screens, and turn it into a birthday card).
Two different .STL models are provided.
Multi-part: The individual pieces are separate parts in the model, allowing them to be assigned different colors in the slicer (no painting required). Either load the .STL file into your slicer and split it into separate parts, or load the .3mf project (which is already split up), then change the printer and filament to match your setup. The slicer screenshot shows the individual parts and colors that were assigned for the print shown in the photos.
One-color: Optimized for printing the model in a solid color.
TIP: When removing the print from the build plate, bend the left and right plate edges down slightly along the axis of the hinge; this will loosen the hinge parts. Then flex the plate as usual and the print will pop off.
Design Features:
No supports required
Print-in-place hinge
Optimized for 0.2mm layer height for faster printing.
Printing Notes:
Print using PLA with a 0.4mm nozzle, 0.2mm layer height, structural, 15% infill.
Please DO NOT use the .bgcode file that has been provided (always slice your own files for your specific printer, filament, environment, etc.). The file was only included to provide a reference for approximate print time.