Nato watch band adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enables use of larger Nato watch bands with smaller sized watches.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this adapter so I could use a 22mm Nato watch band on my watch with 16mm pins. It would be easy to adjust for other sizes.
The nice thing about using a Nato watch band is that if one pin or adapter breaks, the watch will still be attached to your wrist.
The adapter also has a bracket on the backside that ensures the adapter stays at a certain angle. This helps keep the watch oriented how you set it instead of spinning around on your wrist constantly.
To remove the adapter, use a sewing needle in the cutout to retract the spring-loaded part of the pin.
Printing
I printed in PLA with 0.2 mm layer height, 25% infill, and 3 walls. Just print two, one for each side (mirroring isn't really necessary).