1 / 2
AR15 Magazine Lip Go/NoGo Gauge — zdjęcie 1
1 / 2

AR15 Magazine Lip Go/NoGo Gauge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Used to check the magazine feed lips, will let you know if you need to make any adjustments to them for proper function.

Ocena
0 / 5
Polubienia
3
Pobrania
9
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Make sure you align the seam as pictured so it does not affect the gauge surface.

Make sure your printer is printing accurately! , the width of the NoGo side of the gauge should be 12.1mm wide. (The Go side is roughly 11.6mm wide).

To use this:

Press down the follower to get it out of the way (or remove it from the magazine).

Align the gauge just like  the photo.

If the gauge won't go down at all the lips are too narrow and need to be widened.

If the gauge slips all  the way down past the feed lips they are too far apart and need to be bent downward/inwards.

Tagi