Motorized retractable bumper sticker display V2 - Hides behind license plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V2 - 1 linear actuator - Allows controversial bumper stickers on your car but hide them when socially necessary
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This allows me to display or hide a bumper sticker depending on the situation. I wanted to speak out via bumper sticker but I am living in an area where it is still sadly commonly practiced. I would worry about my car being vandalized parking it with the sticker visible plus sometimes it's just socially awkward, this allows me to display it while driving but hide it as approaching a destination I can hide it with a push of a button
-this model uses nuts inserted during a pause in the printing
-the stand files are just for testing it before install
the license plate itself is attached with M6 bolts that need a paused layer and placed into place. The frame is attached to the car with the original screws, all other hardware is M3
for the linear actuator I used an “AWINLI Mini Linear Actuator 12V 4 Inch Stroke” from amazon, these actuators auto stop at their limits, which made the design simple, these seem to go by many different brand names
to activate it I use :SRDKG - 12v wireless Forward Reverse Remote Control Switch and it is powered from the rear accessory outlet