Creality Ender 2 PRO (Z Axis)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been looking for good Z Axis support for my Ender 2 PRO, but what I found was too loose fit or doesn't fit at all…
- Ocena
- 4,9 / 5
- Polubienia
- 52
- Pobrania
- 435
- Wydruki
- 12
- Wyświetlenia
- 2001
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've been looking for good Z Axis support for my Ender 2 PRO, but what I found was too loose fit or doesn't fit at all - so I made my own in the end. Printing details are the description, but I also attached STEP file so you can edit this fix as you want :)
It's made for bearing with outer diameter of 22mm (it's 608 Bearing if I'm not mistaken) with +0.1mm (diameter) for filament shrinkage - for me it was really great fit. With a bit of pressure it's really tight there and I managed to push bearing in the hole with fingers.
Step by step how I mounted mine:
Z Axis position for 180mm (Z max for me)
Fit bearing on the Z axis
Tight both screws to fix position
Print Settings
Printer Brand:
Creality
Printer:
Ender 2
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20
Filament: Creality PLA White
Category: 3D Printer Parts