1 / 1
Circle cutter for clay slab for 2 1/4" and 2 1/2" diameters — zdjęcie 1

Circle cutter for clay slab for 2 1/4" and 2 1/2" diameters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool for cutting circles out of clay slabs with a slight spring to it, to release better for 2.25 and 2.5" diameters

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are simple circle-cutting tools designed for cutting clean, consistent discs from clay slabs. The set includes cutters sized to produce approximately 2¼″ and 2½″ diameter finished pieces after firing, with the cutter dimensions enlarged to account for roughly 10–12% clay shrinkage.

I modeled these fairly quickly because I needed to cut a number of circles from a slab and wanted something faster and cleaner than tracing a template and cutting each one individually with a pin tool.

I had previously tried a conventional, full-circle cookie-cutter-style clay tool. It cut the clay well, but the problem was getting the disc back out: the freshly cut clay tended to stick inside the cutter. Pushing or digging the piece out could easily distort the edge, leave fingerprints, or otherwise damage a disc that had just been cut cleanly.

This design is an attempt to solve that problem by making the cutter slightly flexible rather than a completely rigid closed ring. After pressing the tool through the slab, the cutter can be given a little flex or springing action to encourage it to release from the edge of the clay. The idea is to separate the cutter from the clay rather than having to pry the clay out of the cutter.

Once released, the clay disc should be much easier to pick up, move, compress, decorate, or incorporate into a slab-built piece without distorting its circular shape.

The two sizes are intended for projects requiring finished diameters of approximately 2.25″ (the one with 2pt25 in the name) and 2.5″. Because they are designed around 10–12% shrinkage, the actual wet-clay cutting diameters are intentionally larger than those nominal finished dimensions. Exact fired size will naturally vary depending on the clay body, firing temperature, and actual shrinkage of your clay.

This was a quick, purpose-built tool rather than an attempt to reinvent the standard clay cutter: the main goal was simply to get the clean cut of a cookie cutter while making it much easier to release a soft clay disc without messing up the edge.

Tagi