The Illusionist's Bottle - Magic Trick with Hidden Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bottle with a hidden compartment that allows you to place an item inside that is larger than the bottle's neck.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
### 🎩 Magic Trick: Secret Compartment Bottle (Stash Bottle)
A fully 3D-printable bottle with a completely hidden secret compartment at the bottom. Perfect as a magic prop for vanishing/appearing object tricks, or simply as a clever stealth safe for your small valuables!
You can fill the top section with water to make the bottle look completely genuine, while your secret items inside the bottom compartment remain 100% safe and dry.
#### 🔮 How to use it in a Magic Routine:
1. Show the audience a standard-looking bottle.
2. Open the top cap and pour some water into a glass to prove it's an ordinary bottle.
3. Mysteriously "materialize" a dry object (a rolled-up banknote, a key, or a predicted note) by unscrewing the invisible bottom compartment!
#### 🛠 Design & Engineering Features:
* No Supports Needed: All internal thread angles are designed at a safe 60° slope. It prints completely clean without any internal support geometry.
* Tested Tolerances: Features a 1mm diameter clearance between the threads to ensure smooth and easy screwing right after printing.
* 100% Hidden Seam: The bottom split line is perfectly flush with the body. For an absolute 100% invisible effect, simply slide a standard paper beverage label over the seam.
#### 🖨 Recommended Print Settings (For Makers):
* Layer Height: 0.12mm – 0.16mm (crucial for smooth thread operation).
* Perimeters (Walls): 4 or more (highly recommended for the top section to ensure water-tightness).
* Infill: 15-20%.
* Supports: None.