3DTMT – 3D Printed Toddler Mobility Trainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular 3D-printed toddler mobility trainer assisting young children with standing and walking mobility challenges.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
### Overview
The 3DTMT (3D Printed Toddler Mobility Trainer) is an assistive pediatric mobility device designed to help toddlers with physical disabilities or motor delays gain independence in standing, balancing, and taking their first steps.
### Who is this for?
- Toddlers and young pediatric patients with limited mobility or motor control delays
- Physical therapists, occupational therapists, and caregivers seeking affordable, customizable mobility aids
### Purpose & Key Features
- Early Mobility Support: Encourages posture, leg weight-bearing, and independent exploration for young children.
- Customizable & Modular: Engineered using 3D-printed connectors and frame components that can be adjusted to fit the child's body dimensions.
- Accessible Design: Provides an affordable alternative to expensive commercial pediatric gait trainers.
### Recommended Print Settings
- Material: PETG or ABS/ASA (Recommended for structural parts requiring high durability and impact resistance)
- Layer Height: 0.2 mm
- Infill: 30% – 50% (Gyroid or Grid infill for maximum strength)
- Perimeters / Walls: 4 to 5 walls for critical structural connectors
- Supports: May be needed depending on connector geometry
- Printer Type: FDM Printer
---
Project created via TOM (Tikkun Olam Makers).
Credits & Attribution -
Designed by: LINK PBC -
Designed with: Tikkun Olam Makers (TOM) & MakeGood NOLA