Toothbrush Holder – 4 Electric & 4 Manual Toothbrushes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A toothbrush holder for up to 4 electric and 4 manual toothbrushes, designed for practical and organized everyday use.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printed toothbrush holder is designed to neatly organize up to four electric and four manual toothbrushes in a compact and practical setup. The holder keeps each toothbrush securely separated while providing easy access for everyday use. Its freestanding design requires no wall mounting or drilling, making it suitable for a wide range of bathrooms. The flat base plate was intentionally designed to make cleaning easier and prevent dirt from accumulating in hard-to-reach areas.
Dimensions:
Height: 90 mm
Width: 150 mm
Depth: 110 mm
Electric toothbrush opening: 36 mm diameter
Manual toothbrush opening: 18 mm diameter
Print Recommendation:
30% infill. Print the model on its side to minimize the need for support material.
Feedback and suggestions for improvement are highly appreciated to further refine the design.