5015 fan spacer/joining bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to join the bottom of the 5015 fans that are connected to the Taurus V4/5 duct for the sprite pro
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I made this spacer to join the bottom two screw holes of the dual 5015 fans connected to the Taurus V4/V5 duct for the Sprite Pro on my Ender 3 V2. It helps keep the fans stable and prevents them from moving or flexing.
There are two versions of the spacer:
M4 bolt version: Uses a longer M4 bolt and nut to secure the two fans together.
M3/4 screw version: Uses two screws/bolts, one at each side of the spacer.
Installation is simple, and you do not need to take the whole Taurus duct apart. Simply undo the two screws holding the top of the fans in place, remove the fans, add the spacer, and then reinstall the fans.
A quick and easy way to add extra stability to the dual 5015 fan setup.
You will find the Taurus v5 here hats of to Mkloberg who made it.
Filament: Pet-G
Brand: Slice3D
Nozzle: 235
Bed: 80
Speed: 50mms