Top tether hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single or double top tether mounted snap on hook for extra hanging points in the cars boot.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Open Community License v1.1 + General Attribution v1
Simple cargo hooks designed to increase the number of hanging points in your car's boot/trunk. These clip onto the existing top tether anchor point on the back of the rear seats, giving extra places to hang shopping bags, backpack or other light cargo.
Available in single and double hook versions.
Originally were meant to be a place to put an umbrella on so its up in the air, but new cars trunk is to narrow for my current umbrella. (But could be used this way)
Useful Print information:
Material: PETG minimum; ABS or ASA preferred for better heat resistance (important — car interiors get very hot in direct sun). Avoid PLA — it can soften and deform in a hot car
Orientation: print lying on its side, not flat or upright — this aligns layer lines with the direction of pulling force for much better strength
Walls: 3–4 wall loops recommended for increased strength