1 / 4
BMW R Nine T Scrambler 2016 front mudguard 12mm riser — zdjęcie 1
1 / 4

BMW R Nine T Scrambler 2016 front mudguard 12mm riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lifts factory front Mudguard 12mm.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to raise my standard front mudguard on my 2016 NineT scrambler, this is the second version as the first didn't give enough support to the mudguard only the bracket and it wobbled, this one fits perfectly and fills the entire cutout to hold the mudguard and bracket.

Printed in PETG at 100% fill, used the original fixings but I added a little blue Loctite as there is less thread engagement, have ridden a few hundred miles now and all is good so far.