Serial LoRa dongle for Meshtastic / Meshcore on vintage computers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This enclosure and PCB are designed to connect a Heltec v3 and Max232 modules into one convenient device.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This enclosure and PCB are designed to connect a Heltec v3 and Max232 modules into one convenient device. You can connect it to an old DOS, CP/M, or other vintage computer with an RS-232 port. Depending on the computer, you may need a Null Modem and/or DB-25 adapter.
In addition to the STL and Gerber files included here, you will also need:
Heltec v3, battery, antenna and pigtail (https://link.amazon/B0bMcxb4e)
This was designed for a 1100mAH battery, other sizes might work, but haven't been tested.
Max232 module (https://link.amazon/B0eL9EA0H)
Video of this project: