Tape Dispencer Accessories - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like the Tape Dispenser designs by tetralite, so far I am using three (3) of them in the 3" wide version.…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I really like the Tape Dispenser designs by tetralite, so far I am using three (3) of them in the 3" wide version.
However, I wanted to be able to have multiple rolls of 3/4" or 1" wide tape on the same dispenser, and I wanted each roll of tape to dispense without rolling an adjacent roll.
Although I will probably only use the 3" wide version, I made tape holders in all of the sizes tetralite originally used (3", 4", and 6").
The new tape holders can be mixed and matched as they come in 1", 2" and 3" widths, to suit your needs.
I use a "washer" to keep the individual tape holders from rubbing against each other, and I have included my re-mixed version of the Hub Bolt with a 29mm thread.
These files are only the accessories I made, you will still need to get the original files from https://www.thingiverse.com/thing:4927980
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
.25mm
Infill:
30%
Filament: Inland PLA+ Black
Category: 3D Printing