HPI Stage-D24 RWD Drift – Replacement T-Bar (Quick Fix / Printable Spare)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare Part for HPI D24 Drift
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Broke your original rear suspension T-bar and don't want to wait weeks for spare parts to arrive? This is a 3D-printable replacement designed to get your micro drift chassis back sideways immediately.
V3 is Out Now
Important Notes & Design Info:
Quick Fix Design: Please note that this is meant as an emergency spare/quick fix. It is not intended to be as perfect or durable as the stock factory composite part, but it fits nicely and works great for casual track sessions.
2.0 mm Material Thickness: To compensate for the flexibility of printed plastics compared to the original carbon fiber / FRP plate, this model is designed at 2.0 mm thickness. Printing this in PETG provides a flex rate that comes very close to the original part's stiffness.
Recommended Print Settings:
Material: PETG (recommended for impact resistance & elastic flex), ABS, or Nylon. Avoid standard PLA as it tends to deform or snap under repeated torsion.
Infill: 100% (essential for consistent flex dynamics, strength, and solid screw seating)
Layer Height: 0.12 mm – 0.16 mm (for clean M2 countersink angles).
Orientation: Print flat on the build plate with the countersinks facing up.
Have fun drifting, and feel free to share your makes!