1 / 2
Slide-On Slim Case for Mangmi Air X (Zeroshin Remix) — zdjęcie 1
1 / 2

Slide-On Slim Case for Mangmi Air X (Zeroshin Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hardware-free Mangmi Air X case. Features a fast-printing 0.8mm vase mode slide-on shell & built-in MicroSD card slots!

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Protect your Mangmi Air X with this ultra-lightweight, hardware-free hard case featuring a fast-printing vase mode slide-on lid!

This model is a streamlined, print-optimized remix of the Mangmi Air X Hard Case by Zeroshin. Instead of heavy physical latches, hinges, or screws, this design reimagines the enclosure into a sleek, two-piece slide-on shell. It offers great drop protection while remaining incredibly easy to print and carry in your bag.

What makes this remix special:

  • Vase Mode Slide-On Lid: The orange cover is custom-tailored to be printed in Vase Mode (Spiralize Outer Contour) with a 0.8mm layer/line width. This gives it a perfectly seamless, flexible structure that simply slides onto the main frame with a snug friction fit.

  • Optional Accent Shell: The bottom orange plate can be printed to complete the matching dual-color look. It is purely cosmetic and can be permanently secured to the main body with just a few drops of superglue

Recommended Print Settings:

  • Main Inner Body (Black): Printed normally with standard settings. i would go way down with infill 5-10 percent and use 3-4 walls with maybe a additional top layer to make the contours of the handhald go down smooth

  • Outer Covers (Orange): Print using Vase Mode / Spiralized Outer Contour with an extrusion width bumped up to 0.8mm (even on a 0.4mm nozzle) to give the walls maximum rigidity and perfect friction-fit flexibility. (Note the extrusion width is what makes the fit.
    so if its to tight reduce it by 0.05 - 0.1 or if to loose increase it by that amount)
    depending on strength needed increase bottom shell layers

  • BONUS: use a cool looking top and or bottom layer pattern to refract light in nice looking way

  • BONUS 2: u should be able easily add a logo or design if you ad it as a negativ shape on the first 1 or 2 layers

  • Material: Tough PLA or PETG works beautifully.

Tagi