1 / 10
CFS + Space Pi Plus Screens Mod — zdjęcie 1
1 / 10

CFS + Space Pi Plus Screens Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I've thickened the walls of the ventilation channels in the main base and designed mounting for the CFS and SpacePi lcd.

Ocena
0 / 5
Polubienia
5
Pobrania
18
Wydruki
0
Wyświetlenia
290
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Work in progress!!!!

I've slightly modified the original designs. 

I have thickened the ventilation duct walls in the main base, also designed a mount for the CFS and SpacePi displays and added a new front panel.

By the way, I extended the humidity and temperature sensors (so I modified the baseplate - I removed the hole for the sensors), which makes the temperature readings much more accurate. As for humidity, it's a huge underestimate, about 10%. I just need to make some kind of cover for them.

To mark the mounting location (drilling holes for the M2.5mm x 5mm screws), you'll need both display mounting elements. After assembling them together (you can start by attaching them with a single screw at the bottom center), they'll create a template that fits into the housing cutout at the original CFS display mounting location. This allows you to drill/mark five holes for the M2.5x5mm screws, which you then screw in from the inside of the CFS. The rest of the assembly seems fairly straightforward.

Tagi