Denon Overhang Gauges 50mm and 54mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
54mm and 50mm Overhang Gauges for Denon Turntables using 1/2 headshells
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
A couple of people here on Printables asked if I would create a Denon overhang gauge for a Denon turntable so here they are. I do not have a Denon turntable to test these on.They are a remix of my Technics 52mm overhang gauge. I've added a 50mm and a 54mm OHG.
The model in the picture was printed in Prusa slicer in draft at 30% infill in PLA. I would suggest printing in a finer detail like 0.20 for better results. On a side note, not all 3D printers are calibrated so if you are using a printer not calibrated your printed OHG might not be the designed accuracy. For best results use a calibrated 3D printer.