Pocket Razor Blade Holder (Keychain Edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact keychain case for a double-edge razor blade — snug-fit cover, no support needed, prints in under an hour.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
A compact, keychain-ready case for a standard double-edge razor blade. Consists of three printed parts; a base holder, a blade clip, and a protective cover, that together keep the blade secure and safe to carry. Clip it to your keys and you've always got a sharp edge on hand for opening boxes, cutting tape, or general everyday slicing tasks.
Parts
Holder: the main body with the keyring cutout
Blade clip: holds the blade in place inside the holder
Cover: snaps over the holder to fully enclose the blade edge
Printing notes
No supports needed
2 walls and 2 layers of top and bottom, 15% Gyro infill
Prints in under an hour
Printed in PETG, but PLA should hold up fine too
Assembly & use
Place the blade into the holder and seat/slide the blade clip over the blade. Then press the cover over the holder. It's a tight, snug fit, the cover won't pop off accidentally, but you can still pull it off easily when you need to use the blade. The triangular cutout at the top lets you attach it to a keyring.
Safety note
This holds a genuine razor blade edge, handle with care, keep it out of reach of children, and make sure the cover is fully seated before carrying it in a pocket or bag.