Flexible two-sided Canadian flag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexible two-sided Canadian flag, 0.9 mm thick.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
I've been trying ways to make flexible fabric. This is the thinnest flag I could make. Dimensions are 240.4 x 120.4 x 0.9 mm. The print won't be perfect as the white part around the maple leaf is printed 0.3 mm above the bed.
Slicing (.3mf file supplied for PrusaSlicer)
Use 0.15-mm layers.
Set 'skirt loops' to 0 in print settings.
Slice, then add the colour changes at 0.3 and 0.6 mm. There should be two layers of red, then two layers of white, then two layers of red. I used PLA.
Printing
This is VERY delicate, so any imperfections will be more obvious!
After the first two red layers, you may want to check for and CAREFULLY remove any stray 'threads', avoiding lifting the print!
Change to white filament and ensure the nozzle is clean. (I hold a wire brush below the nozzle before hitting 'color changed correctly'.) Print the two white layers.
Change to red, clean up any white threads, then print the top two red layers.
Finally clean up any red threads before the print cools.
I'd like to extend a warm welcome to Europe for our Canadian friends!