CHESSBOARD ( MAGNETIC )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I am designing a 3D-printable magnetic chess board made for easy assembly and portability .
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Magnetic Chess Board
Hi, This is a cool Chess Board which easy to setup/assembly and This chess board uses magnets below the squares so that it dose not move the pieces of the board and help it to keep in one position we move which l will design in future upcoming projects ( stay tuned )
It also have a slide storage drawer for storing all the chess pieces so that u don't misplace the pieces .
Total Parts :-
There are 5 part's :-
Main Body – Holds the chess plate and provides the main structure.
This is the part where magnets are placed into the small circles
– Closes the underside of the board and contains the mounting points.
Drawer – A storage compartment for keeping the chess pieces.
Chess Grid / Square Parts – The individual 30 × 30 mm square elements used to create the playing surface. ( you have to print these squares individually for both black and white )
The goal is to make all of the board components 3D printable, so the complete board can be manufactured using a 3D printer and assembled afterward.
Assembly :-
The assembly of the chess board is designed to be simple:
Place the magnets into to the small holes on the Chess Body for each and make sure you placed the magnet orientation correctly or else it will be a problem in future.
Attach the Black and White 50 × 50 mm squares to the Chess Plate in correct for of 8X8 chessboard pattern.
Glue each black and white square onto the plate after the magnets have been installed. Make sure you do not miss anything.
The Drawer dose not require any complicated assembly , you just need to slide the drawer to the open side of the main body.
THERE YOU GO, FULLY ASSEMBELD MAGNETIC CHESSBOARD is READY.
Future Project ( Chess Pieces):-
I will make the chess pieces so it can be a complete chess set that u guys can enjoy , as l say stay tuned
BYE.
NOTE 1 : Its better to print the parts separately so that the model can fit in the 3d printer
NOTE 2 : I ALSO ADDED THE DRAWING OF THE BOARD WITH THE DIMENSSIONS IN IT ( PDF FILE ).