Lowpoly cat model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist Low-Poly Cat / Minimal Supports
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
### About the Model
This is a clean, mathematically optimized low-poly cat model. Every face and angle has been carefully adjusted and verified using blender's 3D Print tools to ensure a flawless printing experience without any non-manifold geometry or messy overhangs.
### Features
* Minmal% Support-Free: Save your time and filament. No messy support removal required!
* Clean Geometry: Zero intersecting faces, watertight mesh, and a perfectly flat base for excellent bed adhesion.
* Scalable: Looks great as a tiny lucky charm or scaled up into a large geometric statue.
### Print Settings (Recommended)
* Printer: Any FDM Printer (Prusa, Bambu Lab, Ender, etc.)
* Material: PLA, PETG, or ABS (looks amazing with Silk or Matte filaments!)
* Layer Height: 0.16mm - 0.20mm (0.2mm works perfectly fine for low-poly)
* Infill: 10% - 15% (Lightning or Gyroid infill to save material)
* Perimeters/Wall Loops: 2
* **Supports:** NONE (Completely support-free)
### Tips for Best Results
* Make sure your bed is well-leveled, as the model relies on a clean first layer for the paws.
If you scale the model down below 50%, you might want to use a *Brim** just to be safe with bed adhesion.
If you like this model, please leave a ⭐⭐⭐⭐⭐ review and post your makes! I would love to see your color choices!