Looking Glass Go Convention Badge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder turns the Looking Glass Go 3D Display into a 3D convention badge!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder turns the Looking Glass Go 3D Display into a 3D convention badge!
It is designed to use the Go's own screws to secure it in place from the back.
You will need to unscrew the back panel from the unit. Some are hidden under the ribber feet. 8 screws in total.
Cutouts are designed for airflow (as the device gets quite hot), access to the side buttons, and the top USB-C port.
Holes are printed into the handles so you can push raw filament through and melt in place for increased hanging strength.
The handles are designed to fit this comfortable neck strap: https://amzn.eu/d/095vQ89o
Printing:
0.2mm layer height
2+ wall loops
build plate only support
infill density 25%
PLA or PETG work great