Sun and Moon - Colorchange
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coins to perform a color change magic trick and more.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Share Alike
Hi,
This is a fantastic MagicTrick.
Easy to learn.
This routine is called sun and moon and you perform 3 colorchanges during the act.
First you change the color of one coin then you swap the two coins in your fist and for the last you do a instant colorchange right in front of the audience.
I uploaded a ZIP file with the instruction videos and the print file for the paperprinter.
I also uploaded the Videos on Youtube if you dont like to download, the links are at the end of each part.
Update: I added the Videos as GIF here above in the picture section.
I think you can also use the picture above for printing, make sure they have an diameter of 37mm each.
If you use the file and print on A4 Paper it should fit perfect. ( there should be a small black edge around the coin).
Print instructions:
You need 4 round magnets with 10x1mm
Its easy to print beacause its only a small cylinder with a space inside where you put the magnets in
Version 1 (with paperprinter)
I recommend to print in black color.
print the coins with 1.5mm layerheight.
set a break at layer 11 (1.7mm) to put the magnets in
if you have a color paperprinter print the coins and glue them on the 3D printed coins
Version 2 (only 3D prints)
print the inner part of the coins with 1.5mm layerheight with black
print the outer part of the coins with 1.5mm layerheight with 2 colors eg. red and blue
put the magnets into the inner parts at layer 11 (1.7mm)
glue the 2 parts together
*I recommend to print the Version 1 because they look very nice.
*It could be that the magnet shine through the coin of Version 2 because there only 3 layer on each side
*the outer part is there because if the coins fit sometimes not perfect together while you do the trick, you dont flash the other color.
*You can also print 2 normal versions of your coins. (without magnets) They can handled out to the audience to check them :) Just add a cylinder in your slicer with 38mm Diameter and 3.5-4mm height
Trick Instructions:
You have to put 2 different coins together so that they snap together with the magnets. Then you can easy move the "coin" between your finger so the audience cant so that there are 2 coins. (Video: The Trickmove)
Now you can do different moves to flash your audience.
Look at the video for the complete performance so you understand what to do. (Video: Full Routine)
Before you begin you have to put one "pair" of coins in you pocket with the blue side against your leg. If you put it out of your bag you show the blue side in your hand.
There are 3 parts with 3 different moves for the color change.
change the color of one coin on your open hand. (Video: The Instant Change)
swap the coins between your closed hands (Video: The Swapmove)
instant colorchange of the coins in front of the audience. (Video: The Instant Change)
between the 3 steps do the trickmove to show the audience both sides of the coin.
You can do this routine and many other things with this magic coins.
I hope you have fun with this Trick.
If you have some questions dont worry to ask.