Unplugger for main plugs EU type E/F (use PETG!!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily unplug a EU type E/F plug with just two fingers
- Ocena
- 4 / 5
- Polubienia
- 68
- Pobrania
- 126
- Wydruki
- 2
- Wyświetlenia
- 1206
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This device is intended to make unpluggin a EU type E/F main plug easy to remove, wether you have some reduced hand mobility or not.
Easy to print under 30 minutes, requires no support, no assembly required (two mobile pieces printed in place).
Important: print with PETG which is sturdier than PLA. I have tested more than 30 unpluggings in a row with no issue.
If you only print PLA, try the pla_unplugger.stl model, with stronger pivots and looser tolerance.
Requires well tuned printer due to print-in-place required accuracy, and different filament may give different results.
The fusion design source files are provided to help remix and adapt to different plugs if needed.