Funnel w/venting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a couple of funnels to use in the kitchen, and although there are many to choose from here on Thingiverse, I…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a couple of funnels to use in the kitchen, and although there are many to choose from here on Thingiverse, I couldn't help but design my own. This design has ridges that keep it from sealing when used with a bottle or jar. It will always vent along the sides.
I printed it in three (3) sizes: Original, x 1.5, and x 2.0.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Simple Metal
Rafts:
No
Supports:
No
Resolution:
.25mm
Infill:
50%
Notes:
I had to change the side walls from 3 layers to 2 layers, because the model wouldn't infill correctly on larger sizes (at least with the slicer I'm using). At 3-layer thick walls my slicer may as well have been set at 0% infill. At 2-layers thick, everything was fine and the infill worked properly.rnrnSome day when I can justify/afford getting Simplify3D !!! But not today.
Category: 3D Printing