Adjusta-pole: Adjustable foot for dowel rods.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi purpose adjustable feet for dowel rods!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This multi-use file is for an adjustable friction fit to allow a 34mm dowel to be friction fit between two surfaces horizontally or vertically for plants, curtains, even for supports. Features two screw holes for #8 sized wood screws to secure it to the rod and an optional TPU foot to increase friction and protect surfaces.
I've included the F3D file in case you want to adjust it to different diameter rods or adjust the design to your liking.
Threads are a support free and printable design. Though supports are recommended for the mid section of the threaded sleeve.
Print in PLA, PETG, or what ever material suites your needs.
Remember to share your makes and share feedback.