15x110mm Bike BOOST thru axle universal fork mount w/ .STEP (NEW V5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It has been designed for a 15mm axle and 110mm space. It should be universally compatible.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 386
- Wydruki
- 2
- Wyświetlenia
- 1748
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks.
UPDATE: The V5 version is 5mm taller as requested on a comment from Thingiverse.
IMPORTANT: in this V4 version the outer diameter of the mount is 21mm, so it should be compatible with FOX forks and ROCKSHOX torque cap compatible forks. It should make the mount UNIVERSAL.
I have also added the STEP file (.step).
The exact inner diameter for the axle is 15,4mm, I've had problems with tighter values.
V4 It's tough and easy to print. I have printed mine in PETG for better layer adhesion, I have not had problems with overhangs, you should not have them either.
NOTE This mount is intended for home use, not to carry the bike in the car, I would NOT trust a 3D printed fork mount made of plastic, better buy a steel or aluminum fork mount.
Notes:
Printed with a 0,6mm nozzle. 4 cutter layers, 6 top and bottom layers. 45mm/s speed.