Add Portability to the GEN2 240 Tabletop Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to have my GEN2 tabletop box conveniently near me when I am working, but make it easy to put away.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the GEN2 Tabletop design. But like most tinkerers, I wanted to make it portable so that I can move it to what ever project I am working on, or away when the wife complains ;)
I recommend using the .3mf files to generate the supports as I have tweaked them. But if you can make it print better, by all means, use the .stl
You will need the following additional hardware:
(7) M3x16 screws (4 for the handle, 3 for the back lid reinforcement)
(3) M3x10 screws for the front lid reinforcement
(10) M3 nuts (4 for the handle, 6 for the front and back lid reinforcements)
I am new to the 3D printing world so I would really appreciate feedback. Downloads and likes are also appreciated!