Ferment Air Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As a brewer and wine maker, I have used many "Air Locks" over the years during the fermentation stage of brewing. I…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 945
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
As a brewer and wine maker, I have used many "Air Locks" over the years during the fermentation stage of brewing. I really liked the look of the "multi bubble" air locks available in the UK. After a couple of false starts, I came up with this design that fits my needs.
Although this air lock was printed in a solid color, I will be reprinting it in a translucent color (once I purchase some) so I can see the fluid level during use.
Print Settings
Printer Brand:
Printrbot
Printer:
Play
Rafts:
No
Supports:
Yes
Resolution:
.25mm
Infill:
100%
Notes:
I repositioned this model to stand straight up for printing. I opted for both a "Brim" and "Support" where the model touched the bed.
I included a disk (plug) on the mouth of the air lock, so that the slicing software would not build support inside the "fill cone".
Category: 3D Printing