Sage/Breville Bambino riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a riser for making espresso, so that the cup is just below the basket, in order to avoid spilling.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a riser for the Bambino model. This will not require support if the threshold is 24%. I have printed without any support using PLA and it printed fine. You install it between the metal drip tray and the lower drawer. There is a tight fit with both the lower tray and the metal drip tray.
There is an optional cup support designed for Nespresso glass cups, in order to keep the cup in place since the vibrations tend to make the cups move around. This cup support should be printed upside down in order to avoid supports. It should be easy to modify to fit other cups.