1 / 2
Peplink Balance 310 Wall Mount Brackets — zdjęcie 1
1 / 2

Peplink Balance 310 Wall Mount Brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple bracket to wall mount a Peplink Balance 310 5G

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

This is a bracket to mount a peplink balance 310 5g to a wall.

Material: NOT PLA.  Recommend PETG or other higher heat deflection temp material


These settings worked well for me:

  • 0.20mm Structural

  • Perimeters: 4 for strength

  • 30% infill or higher depending on application

  • Supports: Everywhere, Rectilinear, Snug, .2mm (detachable).