Kiwi Bird Tea Bag Holder — feathered, beak holds the string, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sitting kiwi bird, back is the tea-bag bowl, beak holds the string. Feathered body, one part, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A sitting kiwi bird whose back is a small bowl for the used tea bag. The long beak probes the table the way a real kiwi feeds, so it doubles as a hook: wrap the bag's string round it and the paper tag hangs clear of the drips. A shallow notch near the tip keeps the string from sliding off.
The body wears a hair-like feather relief, sculpted rather than modelled, so it reads as a kiwi's shaggy plumage instead of a smooth egg.
46 x 79 x 27 mm, ONE part, about 40 g solid / 18 g at 15 % infill
Bowl 28 x 36 mm, 18 mm deep, rounded floor, 4 mm solid floor, rim walls over 4.9 mm
Flat 41 x 57 mm belly on the bed, beak tip on the bed with a 3 mm flat
No supports: every flank, the beak underside and the head's underside are steeper than 45 degrees
Printing
import as exported, belly down, bowl up. 0.2 mm layers (0.16 mm shows the feathers better), 3 walls, 15 % infill, supports OFF. Use a BRIM: the six toes are thin, low lobes on the bed and will lift at the tips without one (that is the one thing the test print taught). Brown PLA; PETG if hot wet bags land in it every day.
Wash by hand. The bowl is smooth inside; the feather relief is outside only.
